Keysight Technologies N6900 Series - Page 245

Parameter Typical Return
(none) <DC value>
Returns the measured DC current MEAS:CURR?
Returns the measured DC voltage MEAS:VOLT?
Returns the measured DC power MEAS:POW?
MEASure[:SCALar]:CURRent:ACDC?
MEASure[:SCALar]:VOLTage:ACDC?
Initiates, triggers, and returns the total RMS measurement (AC + DC). Values returned are either in
amperes, or volts.
Parameter Typical Return
(none) <ACDC value>
Returns the measured RMS voltage MEAS:VOLT:ACDC?
MEASure[:SCALar]:CURRent:HIGH?
MEASure[:SCALar]:VOLTage:HIGH?
Initiates, triggers, and returns the High level of a pulse waveform. Values returned are either in
amperes, or volts.See Measurement Types.
Parameter Typical Return
(none) <HIGH value>
Returns the measured high level current MEAS:CURR:HIGH?
MEASure[:SCALar]:CURRent:LOW?
MEASure[:SCALar]:VOLTage:LOW?
Initiates, triggers, and returns the Low level of a pulse waveform. Values returned are either in
amperes, or volts.See Measurement Types.
Parameter Typical Return
(none) <LOWvalue>
Returns the measured low level voltage MEAS:VOLT:LOW?
6 SCPI Programming Reference
245 Keysight N6900/N7900 Series Operating and Service Guide