Introduction
This section explains how to use the Keysight N7906A Power Assistant software.
Requirements:
l Keysight N6900/N7900 Series Advanced Power System
l Windows 8 (32-bit and 64-bit)
Windows 7 SP1 (32-bit and 64-bit)
Windows XP SP3 (32-bit)
l Keysight IO Libraries Suite (version 16.3 or later)
l Microsoft .NET Framework 4 (standalone installer)
l Adobe Reader - for viewing the documentation
Installing and Running the Software
The Keysight Connection Expert does not have to be running for you to use the
Power Assistant software, but it must be installed on your computer. However,
before you run the Power Assistant for the first time, you must use the Keysight
Connection Expert to connect to establish a connection to your instrument.
The Power Assistant software is available on the Keysight web at www.keysight.com/find/N7906A. To
install and run the software:
1. Download the file AdvancedPSSoftware_Setup.exe and run it on your computer. This will install
the Power Assistant software.
2. Connect your instrument to your computer and run the Keysight Connection Expert. Make sure
that a connection to your instrument is established.
3. Select the Keysight N7906 icon to run the Power Assistant software application.
5 Using the Power Assistant Software
186 Keysight N6900/N7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
