Update Procedure
Once you have copied both items to your computer, proceed as follows:
1. Run the Universal Firmware Update Utility
2. Browse to the location of the firmware that you just downloaded. Press Next.
3. Select the interface that you are using to communicate with your instrument and enter the
address or connections string. Press Next.
4. Verify that the information is correct for the instrument you are updating. Press Begin Update.
The update utility will now update the firmware and restart your instrument.
Restricting Access
Note that you can restrict access to the instrument by the firmware update utility. This prevents
unauthorized users from updating the firmware.
Front Panel Menu Reference SCPI Command
Select System\Admin\Update
Check the Must log in as admin box.
This requires a user to log into the Admin menu before the
firmware updateutility performs a firmware update.
Not available
8 Service and Maintenance
346 Keysight N6900/N7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
