5-84 2G0947 - 31JAN08
Diagnostics
Condition Code: 26-931
Description
This error occurs when the Machine Control System (MCS) tries to
communicate with the MICROCONTROLLER but receives no response to 5
attempts. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Condition Code: 26-932
Description
This notification occurs when the Machine Control System (MCS) tries to
communicate with the MICROCONTROLLER but receives no response. (Note:
Error 26-931 is generated when this problem is detected on the 5th successive
failed communication attempt.)
System Impact
None - the system will function normally.
User Action
None
FE Action
Web Portal Message Log Message DICOM Message Severity
Film Transport: Internal
Communications Failure
MCS failed to communicate
with Film Path Microcontroller
after multiple attempts
ELEC DOWN 0-Fatal
Web Portal Message Log Message DICOM Message Severity
None MCS failed to communicate
with Film Path Microcontroller
NORMAL 3-Notify
To Next Page
Loading...
