Error detection and troubleshooting
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 109
This chapter contains the following:
A list of the LED flash codes for error recognition
A description of error recognition using PC tools
A list of errors and system errors
Notes on error detection with the MMI
DANGER!
Risk of death due to electrical shock!
Death or serious injury!
De-energise drive controller and secure it against being restarted.
If damaged parts or components need replacing, only ever replace with
original parts.
Danger due to electrical shock and discharge. Wait two minutes (discharge
time of the capacitors) after shut-down.
To Next Page
