General information
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 7
Thank you for choosing an INVEOR α drive controller from KOSTAL Industrie Elektrik GmbH!
Our INVEOR α drive controller platform is designed to be universally usable with all common motor
types.
If you have any technical questions, please call our central service hotline:
Tel.: +49 (0)2331 80 40-848
Monday to Friday: 7 am to 5 pm (UTC/GMT +1)
Fax: +49 (0)2331 80 40-602
E-mail: INVEOR-service@kostal.com
Website
www.kostal-industrie-elektrik.com
1.1 Information about documentation
The following information explains how to navigate through the documentation.
Read this manual carefully in its entirety. It contains important information for operating the
INVEOR α.
We assume no liability for any damage resulting from non-observance of this manual.
This manual is an integral part of the product and applies exclusively to the INVEOR α from
KOSTAL Industrie Elektrik GmbH.
Provide the operator of the system with this manual so it is available when needed.
1.1.1 Other applicable documents
This refers to all manuals that describe how to operate the drive controller system and any other
manuals for the equipment used. Download the 3D files (.stp) for INVEOR and adapter plates from
www.kostal-industrie-elektrik.com.
A description of parameters is available for download (www.kostal-industrie-elektrik.com) for
parametrising the drive controller system. In the download, you will find all the information required
for correct parameterisation.
To Next Page
Loading...