Kostal INVEOR Drive Controller - Digital Inputs

Parameters
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 83
4.036 / 4.066 AI1 wire break time Unit:
Relationship
to parameter:
Parameter
manual:
P. xy
Transfer status:
2
min.: 0 Own value
(to be entered!)
max.: 32767
def.: 0.5
(V 03.70 and higher)
Once the mains is activated, wire break detection is only activated after this
set time
4.037 / 4.067 AIx inversely Unit: integer
Relationship
to parameter:
Parameter
manual:
P. xy
Transfer status:
2
min.: 0 Own value
(to be entered!)
max.: 1
def.: 0
(V 03.80 and higher)
The signal of the analogue input can be inverted here.
0 = disable (example: 0 V = 0 % 10 V = 100 %)
1 = enable (example: 0 V = 100 %
10 V = 0 %)
5.3.6 Digital inputs
4.110 to 4.111 DIx inverted Unit: integer
Relationship
to parameter:
Parameter
manual:
P. xy
Transfer status:
2
min.: 0 Own value
(to be entered!)
max.: 1
def.: 0
This parameter can be used to invert the digital input.
0 = disable
1 = enable