General information
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 15
1.9 Safety instructions
The following warnings, precautionary measures and information are provided for your safety and
serve to prevent damage to the drive controller and the components connected to it.
This chapter contains warnings and information that are generally applicable when handling drive
controls. They are split into general information, transport & storage and dismantling & disposal.
Specific warnings and comments that apply to specific activities can be found at the start of the
appropriate chapters and are repeated or added to at various critical points in these chapters.
Please read this information carefully as it is provided for your personal safety and will also prolong
the life of the drive controller and connected devices.
1.9.1 General information
Carefully read this operating manual and the warning signs affixed to the drive controller before
installation and commissioning. Make sure that all warning signs on the drive controller are
legible; replace any missing or damaged signs.
They contain important information on the installation and operation of the drive controller.
In particular, note the information in the "Important information" chapter.
KOSTAL Industrie Elektrik GmbH assumes no liability for damages arising from the
non-observance of this operating manual.
This operating manual is an integral part of the product. It applies exclusively to the drive
controller from KOSTAL Industrie Elektrik GmbH.
Keep the operating manual close to the drive controller so it is easily accessible to all users.
The drive controller can only be operated safely if the required environmental conditions listed in
the “Suitable environmental conditions” chapter are met.
To Next Page
Loading...
