Kostal INVEOR Drive Controller - I 2 T

Parameters
102 Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN
5.5.2 I
2
T
33.010 I
2
T fact. motor Unit: %
Relationship
to parameter:
33.031
33.011
Parameter
manual:
P. xy
Transfer status:
2
min.: 0 Own value
(to be entered!)
max.: 1000
def.: 100
The percentage current threshold (in relation to motor current 33.031) at the
start of integration can be set here.
0 % = disable
We recommend using winding protection contacts in heat-sensitive
applications!
33.011 I
2
T time Unit: s
Relationship
to parameter:
33.010
Parameter
manual:
P. xy
Transfer status:
2
min.:
0 Own value
(to be entered!)
max.: 1200
def.: 30
Time after which the drive controller switches off with I²T.
33.138 Holding current time Unit: s
Relationship
to parameter:
33.010
Parameter
manual:
P. xy
Transfer status:
2
min.:
0 Own value
(to be entered!)
max.: 3600
def.: 2
Only for asynchronous motors.
This is the time during which the drive is held at continuous current after the
brake ramp has been completed.