Kostal INVEOR Drive Controller - Model Description

Overview of the drive controller
24 Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN
This chapter contains information on the scope of delivery for the drive controller and the function
description.
2.1 Model description
Fig.: 7 Item description
Key
1 Drive controller series: INVEOR 6 Application printed circuit board:
AP12 - standard
AP13 - CANopen
2
Installation location/size: M-motor-
integrated, size: α
7 Operation: DK01 – Standard
(without operating film)
DK04 - with operating film
3 Input voltage: IV02 – 230 V 8 Housing: GH10 – standard cooling
elements
(painted black)
4 Recommended motor rating:
PW01 (0.25 kW); PW02 (0.37 kW);
PW03 (0.55 kW); PW04 (0.75 kW)
9 Firmware version: CO00 - standard
CO01 - Specific
5 Power printed circuit board:
LP01 - standard
LP07 - IT network
10 Equipment generation: 1 - current
version