Installation
30 Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN
The standard colour is black RAL 9005 (black).
Disassembling the circuit boards (even for the purpose of painting the housing sections) renders
the warranty void!
Mounting points and sealing surfaces must be kept free of paint for purposes of EMC and
grounding!
3.3.2 Suitable installation location for the motor-integrated drive
controller
Ensure that the motor with a motor-integrated drive controller is only installed and operated if
aligned as shown in the following diagram.
Fig.: 9 Motor installation location/permitted alignments
IMPORTANT
INFORMATION
During assembly, no condensate may enter the drive controller from the motor
To Next Page
Loading...