Kostal INVEOR Drive Controller - INVEOR Α Adapter Cable; Internal Potentiometer; Fig.: 41 INVEOR Α Adapter Cable; Fig.: 42 Internal Potentiometer

Optional accessories
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 135
9.5 INVEOR α adapter cable
Fig.: 41 INVEOR α adapter cable
The "INVEOR α adapter cable" is needed to connect the MMI handheld controller or PC
communication cable with the INVEOR α.
IMPORTANT INFORMATION
The "INVEOR α adapter cable"
(art. no. 10118219) may only ever be used with an INVEOR α.
9.6 Internal potentiometer
Fig.: 42 Internal potentiometer
The internal potentiometer (art. no. 10118232) is used to specify the nominal speed in an infinitely
variable manner.