Kostal INVEOR Drive Controller - Instructions Concerning Operation

General information
Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN 19
IMPORTANT INFORMATION
 If different voltages are used (e.g. +24 V/230 V), crossing cable runs are not permitted
under any circumstances. The operator must also ensure compliance with the applicable
regulations (e.g. double or reinforced insulation acc. to DIN EN 61800-5-1).
 The drive controller contains components susceptible to electrical discharge.
These may be destroyed through improper handling. Therefore, precautionary measures
against electrostatic charges must be taken when work is performed on these
components.
1.9.5 Instructions concerning operation
DANGER!
Risk of death due to electrical shock!
Death or serious injury!
De-energise drive controller and secure it against being restarted.
DANGER!
Risk of death due to revolving mechanical parts!
Death or serious injury!
De-energise drive controller and secure it against being restarted.