General information
22 Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN
Pressure test on an INVEOR α
IMPORTANT
INFORMATION
A pressure test is not permitted on a standard INVEOR.
1.9.7 Repairs
DAMAGE TO PROPERTY POSSIBLE
Damage to property possible
If the information is not observed, the drive controller could be damaged and destroyed during
subsequent commissioning.
Repairs to the drive controller may only be performed by the KOSTAL Service department.
CAUTION!
Risk of burns from hot surfaces!
Serious burns to the skin from hot surfaces!
Allow the drive controller's cooling elements to cool sufficiently.
DANGER!
Risk of death due to electrical shock!
Death or serious injury!
De-energise drive controller and secure it against being restarted.
Danger due to electrical shock and discharge. Wait two minutes (discharge time
of the capacitors) after shut-down.