Kostal INVEOR Drive Controller - Page 58

Commissioning
58 Operating manual for INVEOR α | DOC01539818 - 0004 | 2017-01 | V2.0 EN
DAMAGE TO PROPERTY POSSIBLE
The drive controller may be damaged if the notices are not observed!

When pulling off the jack plug, do not move the
INVEOR α adapter cable in the directions indicated
by the arrows.

Only pull the INVEOR α adapter cable off the jack
plug in a straight line.
7. Pull the INVEOR α adapter cable off the jack plug in a straight line.
8. Screw the transparent screw connection back in.
See Fig. of block diagram in chapter Schnellinbetriebnahme 11
In order to ensure an ideal operating structure for the PC software, the parameters are classified
into different access levels.
The following levels exist:
 handheld controller: The drive controller is programmed using the handheld controller.
 user: The basic parameters can be programmed into the drive controller using the PC
software.
 Manufacturer: An extended selection of parameters can be programmed into the drive
controller using the PC software.