MOTORCYCLE 9
4MOTORCYCLE
4.1Jacking up motorcycle front
Note
Danger of damage Danger of damage by the vehicle running away or falling over.
– Always place the vehicle on a firm and even surface.
– Jack up the motorcycle rear end. ( p. 9)
700250-01
– Move the handlebar to the straight-ahead position. Align the work stand at the front
with the adapters to the fork legs.
Work stand front (61029055300) ( p. 198)
Info
Always jack up the rear of the motorcycle first.
– Jack up the motorcycle at the front.
4.2Taking front of motorcycle off work stand
Note
Danger of damage Danger of damage by the vehicle running away or falling over.
– Always place the vehicle on a firm and even surface.
– Secure the motorcycle against falling over.
– Remove the work stand from the front.
4.3Jacking up motorcycle rear
Note
Danger of damage Danger of damage by the vehicle running away or falling over.
– Always place the vehicle on a firm and even surface.
700251-01
– Insert the work stand adapter in the rear of the work stand.
Work stand adapter (61029055120) ( p. 197)
Work stand rear (61029055100) ( p. 197)
– Stand the motorcycle upright, align the work stand to the link fork and the
adapters, and jack up the motorcycle.
4.4Taking rear of motorcycle off work stand
Note
Danger of damage Danger of damage by the vehicle running away or falling over.
– Always place the vehicle on a firm and even surface.
– Secure the motorcycle against falling over.
– Remove the work stand from the rear and lean the vehicle on the sidestand.
To Next Page
Loading...
Need help?
General
