KTM 1190 RC8 EU 2008 - 05;Exhaust; Removing the Exhaust Cover Completely; Installing the Exhaust Cover Completely; Removing the Exhaust System

05/EXHAUST 24
905/EXHAUST
9.1Removing the exhaust cover completely
– Remove the side covers. ( p. 36)
200532-10
– Remove screws .
– Remove screws  on both sides.
– Take off exhaust cover  completely.
9.2Installing the exhaust cover completely
200532-11
– Position the exhaust cover.
– Mount and tighten screws .
Guideline
Remaining chassis screws M5 5 Nm (3.7 lbf ft)
– Mount and tighten screws  on both sides.
Guideline
Remaining chassis screws M5 5 Nm (3.7 lbf ft)
– Install the side covers. ( p. 36)
9.3Removing the exhaust system
Info
The radiator has only been removed to illustrate the procedure more clearly.
– Remove the exhaust cover completely. ( p. 24)
– Remove the seat. ( p. 32)