14/LIGHT SYSTEM, INSTRUMENTS 62
17.7Setting fuel reserve display TRIPF RESET
Condition
The ignition is on.
The motorcycle is standing.
400463-01
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol is on SETTINGS in the info display.
– Press the button three times until the symbol is on TRIP F RESET in the info
display.
– Press the MODE button briefly.
TRIPF RESET appears on the info display with the reaction time.
Info
At delivery, TRIPF RESET is set to 300 seconds.
– Set the reaction time of the fuel reserve display with the button or the but-
ton .
Info
You can set the TRIPF RESET to between 10 and 1000 seconds in steps of
10.
– Press the MODE button briefly.
The settings are stored and the display changes to the SETTINGS menu.
– Press the button briefly and repeatedly until the symbol is on BACK... in the
info display.
– Press the MODE button briefly.
– Press the button briefly and repeatedly until the symbol is on EXIT SETUP in
the info display.
– Press the MODE button briefly.
17.8Setting kilometers/miles SET KM/MILES
Info
Making a country-specific setting.
Condition
The ignition is on.
The motorcycle is standing.
400464-01
– Press the button and the button for 3 - 5 seconds.
– Press the button three times until the symbol is on UNITS in the info display.
– Press the button or the button briefly and repeatedly until the symbol is
on SET KM/MILES in the info display.
– Press the MODE button briefly.
The selected unit appears on the left of the display.
– Select the unit with the button or the button .
– Press the MODE button briefly.
The settings are stored and the display changes to the UNITS menu.
– Press the button briefly and repeatedly until the symbol is on BACK... in the
info display.
– Press the MODE button briefly.
– Press the button briefly and repeatedly until the symbol is on EXIT SETUP in
the info display.
– Press the MODE button briefly.
To Next Page
Loading...
