KTM 1190 RC8 EU 2008 - Important Service Tasks to be Carried out by an Authorized KTM-RC8 Workshop. (as Additional Job)

GREASING AND SERVICE TABLE 177
K10N K75A K150A J1A J2A
Wheels Check the tire condition. ( p. 44) • • •
Check the tire air pressure. ( p. 44) • • • • •
Check the chain wear. ( p. 47) • • •
Check the rear sprocket / engine sprocket / chain sliding guard to
ensure that they are tight.
• • •
Check the rear sprocket / engine sprocket for wear. ( p. 47) • • •
Check the chain tension. ( p. 45) • • •
Clean the chain. ( p. 45) • • • • •
Check chain sliding guard. ( p. 47) • • • • •
Check wheel bearings for play. • • •
Check the rear hub shock absorbers. ( p. 47) • • • • •
K10N: after 1,000 km (621.4 mi)
K75A: every 7,500 km (4,660 mi)
K150A: every 15,000 km (9,320 mi) / after every sporting use
J1A: annually
J2A: every 2 years
38.2Important service tasks to be carried out by an authorized KTM-RC8 workshop. (as additional job)
K150A K300A J1A J2A
Completely service fork. •
Completely service shock absorber. •
Clean and grease the steering head bearing and sealing elements. • • •
Clean battery poles and treat with contact grease. • •
Change the coolant. •
K150A: every 15,000 km (9,320 mi) / after every sporting use
K300A: every 30,000 km (18,640 mi)
J1A: annually
J2A: every 2 years