35/WATER PUMP, COOLING SYSTEM 146
24.3Removing the radiator
– Remove the exhaust cover completely. ( p. 24)
– Remove the inside cover. ( p. 36)
200505-10
– Remove the drain plug of water pump and of radiator . Completely drain the
coolant.
– Mount and tighten the drain plug of water pump and radiator .
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
200504-10
– Loosen the hose clamps. Detach radiator hoses .
– Push back the cover. Unplug the connector of thermoswitch .
– Unplug connector of the radiator fan.
– Unplug the connector of ignition pulse generator .
– Unplug the connector of horn .
200506-10
– Loosen hose clamps . Remove the radiator hose.
– Remove screw .
200507-10
– Remove screw . Take off the radiator.
24.4Installing the radiator
200507-11
– Position the radiator. Mount and tighten screw .
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
To Next Page
Loading...
