GREASING AND SERVICE TABLE 176
38GREASING AND SERVICE TABLE
38.1Important service tasks to be carried out by an authorized KTM-RC8 workshop.
K10N K75A K150A J1A J2A
Engine Change the engine oil and filter, clean the oil screen. ( p. 155) • • • • •
Check the valve clearance. ( p. 149) •
Replace the spark plugs. •
Check the engine fixing screws and other engine screws accessible
from outside to ensure that they are tight.
• • •
Check the clutch. •
Clean the oil jet for clutch lubrication. •
Fuel injection Read out the status query and fault memory with KTM DIA. • • •
Check bellows for tears and leaks, and check the linkage of the
throttle valve spigot for freedom of movement.
•
Check the cable harness of the throttle valve body for damage and
correct routing.
•
Check hoses of vacuum sensors, SLS hoses and vent hoses for
damage, correct routing and leaks.
• • • • •
Check the fuel hose for damage, correct routing and leaks. • • • • •
Check fuel pressure. • •
Attachments Check the cooling system for leaks. • • • • •
Check the water pump for leaks (visual check). • • •
Check the coolant level. ( p. 145) • • • • •
Check the antifreeze. ( p. 145) • • • • •
Check the functioning of the radiator fan. • • •
Check the exhaust system for leaks and correct fitting and check
that the exhaust holders are tight.
• • •
Check bowden cables for damage, smooth operation, kink-free
routing and adjustment.
• • • • •
Check the fluid level of the hydraulic clutch. ( p. 142) • • • •
Check the air filter and change if necessary. Clean the air filter
box.
•
Drain the drainage hose of the air filter box. • • • • •
Check cables for damage and kink-free routing. • • •
Check the headlight adjustment. ( p. 64) • • • • •
Check the functioning of the electrical equipment. • • • • •
Check the fairing parts for damage and breakage. • • •
Check screws and for tightness. • • •
Brakes Check the front brake linings. ( p. 53) • • •
Check the rear brake linings. ( p. 54) • • •
Check the front brake discs. ( p. 40) • • •
Check the rear brake disc. ( p. 45) • • •
Check the brake fluid level of the front brake. ( p. 53) • • • • •
Check the rear brake fluid level. ( p. 55) • • • • •
Change brake fluid. • •
Check that brake lines are undamaged and free of leaks. • • • • •
Check the braking. • • • • •
Check screws and guide pins of the brake system for tightness. • • •
Chassis Check the shock absorber and fork for leaks and function. • • • • •
Bleed fork legs. ( p. 12) • • • • •
Check the steering head bearing and adjust if necessary. • • •
Check the swingarm bearing. • • •
Check deflector. • •
Check the eccentric shaft adjustment. • •
Check all screws to make sure they are tight. • • •
To Next Page
Loading...
