KTM 1190 RC8 EU 2008 - Fitting Oil Filter; Filling Up with Engine Oil

38/LUBRICATION SYSTEM 156
700302-10
– Remove screws .
– Take off the left exhaust cover .
700287-01
– Stand the motorcycle on its side stand on a horizontal surface.
– Place a suitable container under the engine.
– Remove the oil drain plug  with the magnet, O-rings and oil screen.
– Remove the oil filter. ( p. 157)
– Completely drain the engine oil.
700292-01
– Thoroughly clean the magnet  and oil screen  of the oil drain plug.
700288-01
– Fit and tighten the oil drain plug with the magnet, O-rings and oil screen.
Guideline
Oil drain plug M20x1.5 20 Nm
(14.8 lbf ft)
– Fit the oil filter. ( p. 158)