KTM 1190 RC8 EU 2008 - Storage; Putting into Operation After Storage

TECHNICAL DATA - CHASSIS TIGHTENING TORQUES 173
Screw, sidestand M10 35 Nm (25.8 lbf ft)
Loctite
®
243™
Screw, connecting lever, shock
absorber deflector
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
Remaining chassis screws M10 45 Nm (33.2 lbf ft) –
Nut of bell crank on frame M14x1.5 100 Nm (73.8 lbf ft) –
Lambda probe M18x1.5 45 Nm (33.2 lbf ft) –
Nut, swingarm pivot M19x1.5 130 Nm (95.9 lbf ft) Thread greased
Screw, seat lock M22x1.5 8 Nm (5.9 lbf ft) –
Nut, rear wheel spindle M25x1.5 90 Nm (66.4 lbf ft) Thread greased
Screw, front wheel spindle M25x1.5 45 Nm (33.2 lbf ft) –
Screw, steering head M25x1.5 18 Nm (13.3 lbf ft) –