03/FRAME 20
700338-01
– When you screw in the rear left fixing screw, the plug-in cable binder is pushed
out of the thread. To reposition the cable of the lambda probe, fix the plug-in cable
binder in the remaining free drill hole.
Info
Check the cable routing. The cable of the lambda probe should not be taut.
700364-01
– Position bushings .
– Mount and tighten screws .
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
– Fit the seat. ( p. 32)
To Next Page
Loading...
