Kyocera 408ci - Page 392

8-9
Setup and Registration (System Menu) > System Menu
Sleep Level (models except
for Europe)
*1
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal
Sleep mode.
Value: Quick Recovery, Energy Saver
Sleep Rules Select whether to use the Energy Saver mode for the following functions individually:
• ID Card Reader
*2
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, the ID card
cannot be recognized.
Weekly Timer Settings Configure settings for switching the machine into Sleep mode and waking it
automatically at a specified time for each day of the week.
Weekly Timer Select whether to use Weekly Timer.
Value: Off, On
Schedule Specify the time for each day of the week at which the machine enters Sleep mode
and recovers.
Retry Set the number of retry to switch the machine into Sleep mode.
Value: Limited Retries, Unlimited Retries
NOTE
• If [Limited Retries] is selected, set the number of retry. The setting range is 0 to
10.
• If [Unlimited Retries] is selected, retry is performed until the machine enters
Sleep mode.
Retry Interval Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (increments of 10 seconds)
Power Off Timer (models
for Europe)
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours,
1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Item Description