Kyocera 408ci - Page 423

8-40
Setup and Registration (System Menu) > System Menu
Send and Forward
[System Menu/Counter] key > [Function Settings] > [Send and Forward]
Item Description
Forward Settings Select whether to forward the original.
Value: Off, On
NOTE
When selecting [On], select rules to forward from [Email], [Folder (SMB)],
[Folder (FTP)], [Fax]
*1
, [iFax (Via server-On)]
*2
, and [iFax (Via server-Off)]
*2
.
*1 Displayed only when the optional fax kit is installed.
*2 This function is displayed when the optional Internet FAX Kit is activated.
Destination Add Set the destination to which the original is forwarded. One destination can be
set. Follow the steps below to register the destination.
• Addr. Book
•Email
•SMB
• FTP
Specifying Destination (page 5-43)
Job Settings Color Setting Configure the color settings for forwarded original.
Value: Auto Color (Color/Grayscale), Auto Color (Color/B & W), Full Color,
Grayscale, Black & White
Scan
Resolution
Select resolution for stored original.
Value: 600x600dpi, 400x400dpi Ultrafine, 300x300dpi, 200x400dpi
Superfine, 200x200dpi Fine, 200x100dpi Normal
File Format Select the file format of forwarded original.
File Format for Send and Forward (page 8-41)
File Separation Set whether originals are divided into multiple files before being forwarded.
Value: Off, Each Page
Email Subject Enter a maximum of 256 characters for the subject of forwarded E-mail.
Character Entry Method (page 11-9)
FTP Encrypted
TX
Set whether originals are encrypted before being forwarded.
Value: Off, On
NOTE
This function is displayed when SSL is set to [On] in Security Settings.
Security Settings (page 8-66)