Kyocera 408ci - Page 458

8-75
Setup and Registration (System Menu) > System Menu
Storing Jobs
[System Menu/Counter] key > [Security Settings] > "System Stamp" [Storing Jobs]
Configure stamp settings for storing documents in USB drive.
After configuring the setting, return to the Custom Box (Storing Documents) screen from System Menu, and select the
[Reset] key.
Item Description
Text Stamp Text Stamp Select whether to print a text stamp on all storing jobs.
Value: Off, On
NOTE
When [On] is selected, the Text Stamp settings cannot be changed when
storing.
Edit Text Select a text string to be stamped from templates, or enter a maximum of 32
characters for the text string.
NOTE
Templates that have been set will appear. For details on registering templates,
refer to the following:
Text (Text Stamp) (page 8-32)
Position Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle, Bottom Right
NOTE
Specify the detailed stamp position using numeric values.
Font Set the font of the text stamp.
Value
Font: Courier, Letter Gothic
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font (Text Stamp)
(page 8-32)
Color: Black, Cyan, Magenta, Yellow, Red, Green, Blue, White
Style: None, Bold, Italic, Bold/Italic
Display Pattern: Transparent, Clipping, Overwrite
Density: 10 to 100% (in 10% increments)