Kyocera 408ci - Page 459

8-76
Setup and Registration (System Menu) > System Menu
Authentication Security
[System Menu/Counter] key > [Security Settings] > "Authentication Security"
If user authentication is enabled, configure the user authentication settings.
Authentication Security (page 9-4)
Bates Stamp Bates Stamp Select whether to print a bates stamp on all storing jobs.
Value: Off, On
NOTE
When [On] is selected, the Bates Stamp settings cannot be changed when
storing.
Edit Text Set the default Bates Stamp. (Max.: 6)
Value: Date, User Name, Serial Number, Numbering, Text 1, Text 2
NOTE
To set [Text 1] or [Text 2], enter a maximum of 32 characters for the text string.
Date Format Set the date display format.
Value: MM/DD/YYYY (Month/Day/Year), DD/MM/YYYY (Day/Month/Year),
YYYY/MM/DD (Year/Month/Day)
Numbering
Default
Set the starting sequence number. If you select [Fixed Digit Number] > [On],
you can set the number of digits of the serial number (1 to 7 digits).
Value
Start #: 1 to 9999999
Fixed Digit Number: Off, On
Position Set the stamp position to be printed.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle, Bottom Right
NOTE
Specify the detailed stamp position using numeric values, and to set the stamp
angle.
Font Set the font of the text stamp.
Value
Font: Courier, Letter Gothic
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font (Bates Stamp)
(page 8-32)
Character Border: Off, Circle, Rectangle, Underline
Color: Black, Cyan, Magenta, Yellow, Red, Green, Blue, White
Style: None, Bold, Italic, Bold/Italic
Display Pattern: Transparent, Clipping, Overwrite
Density: 10 to 100% (in 10% increments)
Item Description