8-80
Setup and Registration (System Menu) > System Menu
Others
[System Menu/Counter] key > [Adjustment/Maintenance] > "Others"
Drum Refresh Remove image blur and white dots from the printout. It takes about 1 minute and
20 seconds. The time required may vary depending on the operating environment.
Drum Refresh (page 10-58)
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the
printing is done.
Laser Scanner Cleaning Remove vertical white lines from the printout.
Developer Refresh (page 10-59)
*1 Displayed only when the optional FAX Kit is installed.
Item Description
Advanced Punch Precision Improves punch positioning.
Value: Off, On
Altitude Adjustment Adjusts the altitude. (358ci)
Value: Nomal, 1001 to 2000m, 2001 to 3000m, 3001 to 3500m
MC Set the MC. (358ci)
Value:1, 2, 3, 4, 5, 6, 7
Diagnostics Memory
Diagnostics
Perform this function to check the machine memory.
Software
Verification
Software Verification (page 8-67)
Restart/
Initialization
Restart
Network
Restart Network (page 8-62)
Restart
Network
(Optional
Network)
Restart Network (page 8-65)
Restart Entire
Device
Restart Entire Device (page 8-66)
Format SSD Format the SSD.
Format SD
Card
Format the SD card. To use an SD card, it is necessary to format the SD card
on this machine first.
When the formatting is complete, data can be written to the SD card.
System
Initialization
System Initialization (page 8-68)
Item Description
To Next Page
Loading...
