Appendix L
APPENDIX L: COMPLIANCE
FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when this equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his
or her own expense. Shielded cables must be used with this unit to ensure compliance
with the Class A FCC limits.
WARNING: Changes or modifications to this unit not expressly approved by Digital
Processing Systems, Incorporated could void the user’s authority to operate the
equipment.
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
EEC Declaration of Conformity
Application of Council Directive(s): 89/336/EEC - The EMC Directive
Manufacturer’s Name: DIGITAL PROCESSING
SYSTEMS INC.
Manufacturer’s Address: 70 Valleywood Drive
Markham, Ontario
Canada L3R 4T5
European Representative’s Name: Pete Cunningham
European Representative’s Address: Romans Business Park, Unit 9
East Street, Farnham
Surrey GU9 7SX UK
Equipment Type/Environment: Information Technology
Equipment
Trade Name and Model Number: DPS-475/DPS-575/
DPS-475AV/DPS-575AV
Year of Manufacture: 2000
233
To Next Page
Loading...
