and manually Fade Out or Cut Out the key from the Keyer Settings Menu, or use the
Keyer front-panel button to fade out the animation.
In Forever mode, the animation will loop indefinitely until the user manually fades or
cuts out the key from the Keyer Settings Menu, or uses the Keyer front-panel button
to fade out the animation.
This setting has no effect on still image keys, which will always be displayed until
manually faded or cut out.
Bumper Style
Specifies whether an animated key (.dan file) will be playing during fade-in and fade-
out, or held on the first and last frame, respectively, during the transition.
Valid Settings: None, Single Frame
Default Setting: None
When the Bumper Style is set to None, the animation will be playing as it is fading in
and out.
When the Bumper Style is set to Single Frame, the first frame of the animation will be
shown and held during the fade-in; the animation will begin playing once fade-in is
complete. The last frame of the animation will be held during fade-out (for both
manual and automatic fade-out).
Save These Settings
Stores the current keyer settings into the next available settings profile, for later recall
with the Settings option of the Keyer Settings menu. The settings will be stored under
the name KeySettings X, where X is the next available free profile number. Settings
files can be renamed or deleted from the Flash Memory Mgmt option of the System
Config menu.
Related Settings: Settings; Flash Memory Mgmt (System Config menu)
62
DPS-475/575 Service Manual
To Next Page
Loading...
