Related Setting: Spatial Filter Mix
When this option is set to Off, no spatial noise reduction is applied.
When this option is set to Max, the spatial noise reduction filter examines all 8 pixels
adjacent to each target pixel, plus the target pixel itself.
When this option is set to On, the spatial noise reduction filter examines 5 pixels for
its calculations.
This option is ignored if the Noise Reduction option is set to Disabled.
Spatial Filter Mix
Controls the weighting in the output of the results of the spatial noise reduction filter
vs. the original input.
Valid Range: Min, 1 to 6, Max
Default Setting: Max
Related Setting: Spatial Filter
When this option is set to Max, the output is based entirely on the results of the
spatial noise reduction filter.
When this option is set to Min, the output is based entirely on the original input.
When this option is set to a middle value (such as 3 or 4), the output is roughly the
average of the original input, and the results of the spatial noise reduction filter.
This option is ignored if the Noise Reduction option is set to Disabled.
Horizontal Bandwidth
Adjusts the horizontal setting of the 2D digital bandwidth filtering. Digital bandwidth
filtering is particularly useful when the output will be fed to a downstream digital
device such as an MPEG encoder.
This option is ignored if the Noise Reduction option is set to Disabled.
Valid Range: Min, 1 to 15, Max
Default Setting: Max
Related Setting: Vertical Bandwidth-Y, Vertical Bandwidth-C
Vertical Bandwidth-Y
Adjusts the degree of the digital vertical bandwidth filtering on the luminance of the
signal. Digital bandwidth filtering is particularly useful when the output will be fed to
a downstream digital device such as an MPEG encoder.
This option is ignored if the Noise Reduction option is set to Disabled.
Valid Range: Min, 1 to 7, Max
Default Setting: Max
Related Setting: Horizontal Bandwidth, Vertical Bandwidth-C
64
DPS-475/575 Service Manual
To Next Page
Loading...