Chapter 8:
Menus: Noise Reduction
CHAPTER 8: MENUS: NOISE REDUCTION
The Noise Reduction Menu is used to configure and enable the noise reduction
features of the DPS-475/575.
Noise Reduction
Enables or disables the noise reduction features of the unit.
Valid Settings: Disable, Enable
Default Setting: Disable
When this setting is enabled, the noise reduction features will follow the
configuration specified in the options detailed later in this section. When disabled, no
noise reduction options will be applied, regardless of the configuration settings.
Noise reduction can also be enabled and disabled using the N/R key on the front panel
of the unit.
The light on the N/R key on the front panel of the unit will be on when noise
reduction is enabled.
Split Screen
Splits the video output image in half (between video with and without noise reduction
applied), providing a visual reference for adjusting noise reduction settings.
Valid Settings: Off, On, Auto
Default Setting: Off
When this option is set to Off, the output video is not split, and the currently enabled
noise reduction settings are applied to the entire output image.
When this option is set to On, the output video image is split in half. The left half of
the screen shows the video with the currently enabled noise reduction settings
applied; the right half of the screen shows the video with no noise reduction applied.
When this option is to Auto, the output video image is split while a noise reduction
setting is being adjusted; when no adjustment is being actively done, the output video
is not split, and the currently enabled noise reduction settings are applied to the entire
output image.
This option is ignored if the Noise Reduction option is set to Disabled.
Spatial Filter
Controls the strength of the spatial noise reduction filter.
Valid Settings: Off, On, Max
Default Setting: Off
63
To Next Page
Loading...