EasyManua.ls Logo

Leitch DPS-475 - Phase Invert L; SDI in; Aud Follows VID

Default Icon
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stereo mode routes the left input to the left output, and right input to the right output.
In Mono-L mode, the left input is routed to both outputs.
In Mono-R mode, the right input is routed to both outputs.
In Swap L-R mode, the left and right inputs are reversed to the outputs. That is, the
left output is routed from the right input, and vice versa.
Mute-L mode routes the right input to the right output, and mutes the left output.
Mute-R mode routes the left input to the left output, and mutes the right output.
Phase Invert L
When enabled, this mode phase-shifts the left channel by 180° to compensate for
incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio
connections.
Valid Settings: Off, On
Default Setting: Off
SDI In
Selects which two channels of SDI Embedded audio will be used from the incoming
SDI video input.
Valid Settings: Ch 1-2, Ch 3-4, Ch 5-6, Ch 7-8, Ch 9-10, Ch 11-12,
Ch 13-14, Ch 15-16
Default Setting: Ch 1-2 (for DPS-475/575 Audio Channel 1)
Ch 3-4 (for DPS-475/575 Audio Channel 2)
Aud Follows Vid
Enables or disables AFV (Audio-Follows-Video) mode. In this mode, each of the
selectable video inputs has an audio input selection linked to it. Whenever the video
input selection is changed, the audio input selection for the channel automatically
changes correspondingly.
Valid Settings: Off, On
Default Setting: Off
Related Settings: AFV-Composite, AFV-SVideo, AFV-CAV, AFV-SDI,
AFV-DV, AFV-Option
AFV mode can be overridden by manually selecting a different audio input (from
the front panel or with the Input audio menu selection) when AFV is enabled.
This does not, however, turn AFV mode off; the next time the video input
selection is changed, the audio will again follow it. AFV mode can only be
disabled through this setting.
When AFV mode is enabled, the AFV indicator for the channel on the front panel
of the unit will be lit.
The AFV link to each of the video inputs is set through the AFV-Composite, AFV-
SVideo, AFV-CAV, AFV-SDI, AFV-DV, and AFV-Option menu options described later
in this chapter.
50
DPS-475/575 Service Manual

Table of Contents

Related product manuals