Leitch DPS-475 - Chapter 5: Menus: Video Setup

Chapter 5:
Menus: Video Setup
CHAPTER 5: MENUS: VIDEO SETUP
The Video Setup menu contains the video configuration options that the user may
wish to change in the course of normal operation. Video configuration options that are
usually set only during initial integration of the unit (VITS insertion, line standard
(525/625), etc.) are found in the System Config menu.
Luma Gain
Adjusts the luminance gain. While setting the luminance gain, the display panel will
also show the maximum luminance level (in IRE or mV) of the incoming video
signal.
Valid Range: -99.99dB to 6.00dB (Y/C, SDI, DV)
-8.01 dB to 4.04 dB (CAV, Composite)
Default Setting: 0.00 dB
Black Level
Adjusts the black level. While setting the black level, the display panel will also show
the minimum luma level of the incoming video signal.
Valid Range: -30.0 IRE to 30.0IRE (525-line mode)
-210.0 mV to 210.0 mV (625-line mode)
Default Setting: 0.0 IRE (525-line mode)
0.0 mV(625-line mode)
Chroma Gain
Adjusts the chrominance gain. While setting the chrominance gain, the display panel
will also show the saturation peak (in %) of the incoming video signal.
Valid Range: -99.99 dB to 6.00 dB (Y/C, SDI, DV, Composite)
-8.01 dB to 4.07 dB (CAV)
Default Setting: 0.00 dB
Hue Phase
Adjusts the output phase.
Valid Range: -45.010° to 44.080°
Default Setting: 0.000°
Color Balance - Cb
Adjusts the amount of the Y-B component in the processed video.
Valid Range: -100.0% to 100.0%
Default Setting: 0.0%
33