Process mode is the normal mode of operation. In Bypass mode, no processing is
applied to the analog audio inputs; they are bypassed directly to the analog audio
outputs.
The analog audio input is also bypassed when the power to the unit is off.
This setting is overridden by the master Bypass key on the front panel of the
unit, and the Function Bypass option in the System Config menu. If either is used
to select the master Bypass mode, the analog audio input will be bypassed
regardless of the setting of this option.
AES/EBU
Toggles between bypassing and processing the AES/EBU audio inputs.
Valid Settings: Process, Bypass
Default Setting: Process
Process mode is the normal mode of operation. In Bypass mode, no processing is
applied to the AES/EBU audio inputs; they are bypassed directly to the AES/EBU
audio outputs.
The AES/EBU audio input is also bypassed when the power to the unit is off.
This setting is overridden by the master Bypass key on the front panel of the
unit, and the Function Bypass option in the System Config menu. If either is used
to select the master Bypass mode, the analog audio input will be bypassed
regardless of the setting of this option.
Gain-R
Adjusts the right output audio gain.
Valid Range: -20.0 dB to 20.0 dB
Default Setting: 0.0 dB
When Dolby-E (Data) Mode (detailed later in this chapter) is enabled , this setting is
forced to unity (0.0 dB) for channel 1.
Gain-L
Adjusts the left output audio gain.
Valid Range: -20.0 dB to 20.0 dB
Default Setting: 0.0 dB
When Dolby-E (Data) Mode (detailed later in this chapter) is enabled , this setting is
forced to unity (0.0 dB) for channel 1.
DDPlex Gain-R
Adjusts the right audio gain for DigiDuplex mode. This setting will not be available
when DigiDuplex mode is not enabled.
Valid Range: -20.0 dB to 20.0 dB
Default Setting: 0.0 dB
Related Setting: DigiDuplex Mode (Video Setup menu)
46
DPS-475/575 Service Manual
To Next Page
Loading...
