Step 3. Install the EDSFF drive.
Figure 63. EDSFF drive installation
a. Ensure that the drive tray handle is in the open position. Slide the drive into the drive bay
until it snaps into position.
b. Close the drive tray handle to lock the drive in place.
Step 4. Continue to install additional EDSFF drives if necessary.
Step 5. Install the EDSFF drive cage cover.
Figure 64. EDSFF drive cage cover installation
After you finish
1. Reinstall the security bezel if you have removed it. See
“Install the security bezel” on page 184.
2. Use the Lenovo XClarity Provisioning Manager to configure the RAID if necessary. For more information,
see:
https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html
Chapter 5. Hardware replacement procedures 105
To Next Page
Loading...
