Lenovo ThinkSystem SR635 V3 - Front I;O Module Cable Routing

Front I/O module cable routing
Use the section to understand the cable routing for front I/O module.
Note: The illustration shows the cabling scenario for server models with 2.5-inch front drive bays. Location
of each connector on the front of the server varies by models. For detailed location of front I/O components
for different models, see “Front view” in User Guide.
Figure 167. Cable routing for a front I/O module on 2.5-inch chassis
From To
1 VGA cable 1 VGA connector on the system board assembly
2 USB cable 2 Front USB connector on the system board assembly
224 ThinkSystem SR635 V3 User Guide