M.2 drive backplane cable routing
This section provides cable routing information for the M.2 drives.
• Based on different drive types, the M.2 drive backplanes differ. Thus cables, connector layout and the
cable routing are also different.
• For the locations of M.2 connectors on the processor board, see
“System-board-assembly connectors”
on page 33
for details.
• The following illustrations and tables list the M.2 drive backplanes supported:
–
“Cable routing for M.2 SATA/NVMe drive PCIe 4.0 backplane” on page 239
– “Cable routing for M.2 SATA/NVMe drive PCIe 3.0 backplane” on page 241
Cable routing for M.2 SATA/NVMe drive PCIe 4.0 backplane
Figure 180. Cable routing for M.2 SATA/NVMe drive PCIe 4.0 backplane
Chapter 6. Internal cable routing 239
To Next Page
Loading...
