Lenovo ThinkSystem SR635 V3 - Remove the Rack Latches

Remove the rack latches
Use this information to remove the rack latches.
About this task
Attention: Read
“Installation Guidelines” on page 45 and “Safety inspection checklist” on page 46 to ensure
that you work safely.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DrpxDWLMfgtXO4O6BVYTim
.
Procedure
Step 1. If the server is installed with the security bezel, remove it first. See
“Remove the security bezel” on
page 183
.
Step 2. On each side of the server, remove the two screws that secure the rack latch.
Figure 100. Rack latch screws removal
Chapter 5. Hardware replacement procedures 157