Step 3.  Insert the Integrated Diagnostics Panel into its assembly. Ensure that the panel is fully seated into 
its assembly. 
Figure 41. Integrated Diagnostics Panel installation into its assembly
Step 4.  Slide the diagnostics panel assembly into the front chassis as shown. And ensure that it is seated in 
place. 
Figure 42. Diagnostics panel assembly installation
After you finish
Complete the parts replacement. See 
“Complete the parts replacement” on page 215.
Fan board replacement
Use this information to remove and install the fan board.
Remove the fan board
Use this information to remove the fan board.
Attention: 
84
ThinkSystem SR635 V3 User Guide