Lenovo ThinkSystem SR635 V3 - Remove a Heat Sink

Figure 92. Processer and heat sink components
1 Captive screws (8)
7 Processor contacts
2 Heat sink 8 Processor triangular mark
3 Processor identification label
9 Carrier triangular mark
4 Heat sink triangular mark 10 Processor carrier
5 Screw bolts (6)
11 Processor heat spreader
6 Retention frame triangular mark
• “Remove a heat sink” on page 148
• “Remove a processor” on page 150
• “Install a processor” on page 153
• “Install a heat sink” on page 151
Remove a heat sink
Use this information to remove a heat sink. This procedure must be executed by a trained technician.
About this task
S002
148 ThinkSystem SR635 V3 User Guide