Step 2. Grasp the fan tabs on both ends of the system fan and carefully lift the system fan out of the server.
Figure 150. System fan removal
After you finish
1. Install a new system fan or install a fan filler to cover the place. See
“Install a system fan” on page 210.
2. If you are instructed to return the old system fan, follow all packaging instructions and use any
packaging materials that are provided.
Install a system fan
Use this information to install a system fan. You can install a hot-swap fan without powering off the server,
which helps you avoid significant interruption to the operation of the system.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
210
ThinkSystem SR635 V3 User Guide
To Next Page
Loading...
