2. If you are instructed to return the old EDSFF drive, follow all packaging instructions and use any
packaging materials provided.
Install a hot-swap EDSFF drive
Use this information to install an EDSFF drive.
About this task
Attention:
• Read
“Installation Guidelines” on page 45 and “Safety inspection checklist” on page 46 to ensure that you
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
DrpxDWLMfgtXO4O6BVYTim
.
Procedure
Step 1. Touch the static-protective package that contains the drive to any unpainted surface on the outside
of the server. Then, take the drive out of the package and place it on a static-protective surface.
Step 2. Remove the drive filler from the drive bay and keep the drive filler in a safe place.
Figure 62. Remove an EDSFF drive filler
a.
Press the latch down to disengage the drive clip from the cage.
b.
Pull and slide the filler out.
104
ThinkSystem SR635 V3 User Guide
To Next Page
Loading...
