Figure 193. Cable routing for onboard configuration of 8 x 2.5 SATA front drives
Table 34. Mapping between one front 8 x 2.5-inch SATA backplane and the system board assembly for onboard
configuration
From To
1 SAS 0 and SAS1 on the front backplane 1 PCIe 7 connector on the system board assembly
Cable routing with an SFF HBA/RAID adapter
The following illustrations and tables show the mapping relationship between backplane connectors and an
8i or 16i SFF HBA/RAID adapter (Gen 3 or Gen 4).
258
ThinkSystem SR635 V3 User Guide
To Next Page
Loading...
