• Go to “Update the firmware” on page 445 for more information on firmware updating tools.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BmyijyY0-lNvapM4fTV5Gf
.
Procedure
Step 1. Touch the static-protective package that contains the new part to any unpainted surface on the
outside of the server. Then, take the new part out of the package and place it on a static-protective
surface.
Step 2. Install the 2.5-inch drive front backplane.
Note: Depending on the specific type, your backplane might look different from the illustration.
• 8-bay drive backplane
Figure 53. Installing the 8-bay drive backplane
1. Align the bottom of the backplane with the slots on of the chassis.
98 ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
