Appendix A. Hardware disassembling for recycle
Follow the instructions in this section to recycle components with compliance with local laws or regulations.
Disassemble the system board assembly for recycle
Follow the instructions in this section to disassemble the system board assembly before recycling.
About this task
The system board assembly contains the system I/O board and processor board. Before recycling each unit,
you need to disassemble the system board assembly.
Procedure
Step 1. Remove the firmware and RoT security module from the system I/O board. See
“Remove the
firmware and RoT security module” on page 241
.
Step 2. Remove the system board assembly from the server, and separate the system I/O board from the
processor board. See
“Remove the system I/O board or processor board” on page 247.
Step 3. Remove the screws as illustrated from the processor board.
© Copyright Lenovo 2023 493
To Next Page
Loading...
