Figure 210. Unlocking the security bezel
Step 2. Press the release latch 1 and rotate the security bezel outward to remove it from the chassis.
Figure 211. Security bezel removal
After you finish
Note: Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Install the security bezel
Use this information to install the security bezel.
About this task
Attention:
• Read
“Installation Guidelines” on page 55 and “Safety inspection checklist” on page 56 to ensure that you
work safely.
• Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Watch the procedure
238
ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
