Figure 123. Removing the riser card from riser 3 cage
a. Loosen the screw that secures the riser card.
b.
Grasp the riser card by its edges and carefully take it out of the riser bracket.
• Riser card 3/4
Figure 124. Removing the riser card from 4LP riser 3/4 cage
After you finish
1. Install a new PCIe adapter to the riser cage. See
“Install a PCIe adapter” on page 162.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a PCIe adapter
Use this information to install a PCIe adapter. The PCIe adapter can be an Ethernet card, a host bus adapter,
a RAID adapter, an add-in PCIe SSD adapter, or any other supported PCIe adapters.
About this task
162 ThinkSystem SR650 V3 User Guide
To Next Page
Loading...
