1 Firmware and RoT security module
2 System I/O board
3 Processor board
For more information about the connectors, switches, or LEDs that are available on the system board
assembly, see:
•
“System-board-assembly connectors” on page 35
• “System-board-assembly switches” on page 36
• “System-board-assembly LEDs” on page 470
• “LEDs on the Firmware and RoT Security Module” on page 473
System-board-assembly connectors
The following illustration shows the internal connectors on the system board assembly which contains the
system I/O board and processor board.
Figure 13. System-board-assembly connectors
1 NMI button
2 Rear USB connector
3 MicroSD socket 4 VGA connector
Chapter 2. Server components 35
To Next Page
Loading...
